How long should garage door cables be?
The lift cable runs from the bottom bracket on each side of the door up to the cable drum on the spring shaft. It has to reach the drum with the door closed and keep a couple of wraps on the drum, so the usual rule is:
cable length = door height + high lift + 12 inches
Round up to the next whole foot, because cables are sold by the foot and a little extra is trimmed or stays on the drum. A 7 ft door takes an 8 ft cable; an 8 ft door takes a 9 ft cable. A cable that is too short cannot be fixed later, so never round down.
Which cable size?
The cable size goes with the drum, and the drum goes with the door's height and weight. Standard residential doors up to 8 ft tall on 4" drums use 1/8" cable; taller doors use 5/32" or bigger. The calculator picks the drum from the maker's ratings (maximum door height, high lift and weight per pair) and gives the cable size rated for it.
Cable wound per opening
As the door opens, each drum winds up the door's height plus a little extra where the door goes round the curve of the track (and the high lift, if any). That number, divided by the drum's circumference, is the number of turns the springs need, which is why door height, track radius and drum all appear in our spring calculator.
Never loosen or replace a cable while the springs are wound: the cables hold the full force of the springs. Unwind the springs first, with proper winding bars, or call a garage door technician.